All purchased device will require configuration of the device to connect to your Wi-Fi network and enter a bitcoin address where you wish to receive your block reward to if your Bilis Miner finds a block.

1. Connect Miner to USB power source. (Laptop, USB outlet etc.)
2. On your computer or mobile phone, connect to the Wi-Fi network provided by your Bilis Miner device. You can achieve this by either scanning the QR code displayed on the screen or manually scanning for the Wi-Fi network and logging in using the credentials below:

   
   Bilis Miner Pro
   The SSID is: BilisMiner
   The Password is: Bilis123

   Bilis Miner Ultra
   The SSID is: BilisMiner
   The Password is: BilisMiner

3. Open a web-browser, you should be automatically re-directed to a set-up page. If you aren’t automatically re-directed simply manually navigate to 192.168.4.1 in a the browser and you should see the setup screen.
4. Click on Configure Wi-Fi.
5. On the next Page, choose you internet Wi-Fi network name under SSID. If you are not given a selection mode, type in your network name. Please be aware that the name is case sensitive. Also key in its password.
6. Key in your BTC address.
7. Ensure the time zone is selected as 8.
8. Click save and the device screen will refresh and restart. If it doesn’t, replug your device into the power source.